Eu:Lu2O3透明闪烁陶瓷的制备与性能

采用湿化学法合成了Eu原子掺量5%的Lu₂O₃陶瓷前驱体,通过SEM、XRD研究了煅烧前后前驱体和1 100 ℃煅烧4 h后粉体的形貌、结构以及物相。结果表明煅烧后的粉体为纳米类球形、高分散且结晶性良好的颗粒。颗粒尺寸为68.5 nm。使用煅烧后的粉体为原料,在1 650 ℃真空烧结30 h制备了高透过率的Eu:Lu₂O₃陶瓷,晶粒尺寸为46 μm,在611 nm处的直线透过率可以达到66.3%。此外对陶瓷的吸收曲线、光致激发和发射光谱特性以及X射线激发发射光谱进行研究。可观察到,Eu:Lu₂O₃陶瓷存在基质和激活离子两类吸收,光致发光光谱和X射线激发发射光谱均可以看出Eu:Lu₂O₃陶瓷存在极强的⁵D₀→⁷F₂跃迁发光,位于611 nm处。对比商业的BGO单晶的X射线发射光谱,可得本实验中制备的陶瓷的光输出为85 000 ph/MeV。Eu:Lu₂O₃陶瓷本身有着高X射线以及高能粒子的阻止能力,结合高光输出特性,表明Eu:Lu₂O₃陶瓷在X射线成像等领域具有巨大的潜在应用价值。     

HIRFL–CSR加速器中束流与真空中剩余气体的碰撞损失

研究了重离子加速器中束流与真空中剩余气体的碰撞损失过程和碰撞截面,在依据大量实验数据的基础上,提出了一组计算离子一原子的电荷交换截面的经验公式.以兰州重离子加速器HDRFL及冷却储存环CSR为例,给出了依据碰撞截面的公式计算束流在加速器真空中的传输效率的方法,并计算了在不同真空度下HIRFL的ECR源轴向注入束运线、注入器SFC、前束运线、主加速器SSC和后束运线等不同加速阶段及CSR的传输效率,并提出合理的真空度要求.HIRFL的真空分布测量和束流的损失测量证明了该计算方法的可靠性.     

Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

非晶金刚石膜的性能及其应用

非品金刚石薄膜具有超高硬度等一系列优异的特殊性能，为工程界孜孜追求的材料表面镀膜。用百纳科技公司研发制造的过滤阴极真空电弧离子镀膜机镀制的非晶金刚石薄膜，SP^3金刚石结构量≥80％，硬度高，膜／基结合力高，摩擦系数小，耐磨损，耐腐蚀，透光率高，在电子，机械，光学，生物医学上有广泛应用前景。我们已在视窗玻璃，丝锥，模具，硬质合金刀头等产品上成功应用。     

强流四脉冲电子束源实验研究

 为了进行强流多电子束源研究，对现有2MeV LIA 注入器进行了四脉冲改造，二极管脉冲电压约500kV。实验研究了天鹅绒阴极在四脉冲条件下的发射能力、传导电流负载效应以及阴极等离子体运动对阴极电子发射和束能量的影响。利用空间电荷限制流模型推算出阴极等离子体膨胀速率在1 ~4cm/μs之间。     

有限核真空中的反核子能谱

通过建立能够自洽地描述核子和反核子束缚态的相对论Hartree模型来研究有限核中的量子真空,其中狄拉克海对介子场方程的贡献由单圈图考虑,模型中还引入了ω介子和ρ介子的张量耦合项.在拟合球形核的性质后得到模型的参数,给出核子有效质量为m*/MN≈0.78;计算得到的核子壳模型能级与实验值相一致,在考虑张量耦合项的效应后真空反核子位阱深度增大了20—30MeV.     

Cosmological Consequences of Scale-Related Comoving Masses for Cosmic Pressure, Mass, and Vacuum Energy Density

According to ideas of Mach, Whitrow, Dirac, or Hoyle, inertial masses of particles should not be a genuine, predetermined quantity; rather they should represent a relational quantity which by its value somehow reflects the deposition and constellation of all other objects in their cosmic environment. In this paper we want to pick up suggestions given by Thirring and by Hoyle of how, due to requirements of the equivalence of rotations and of general relativistic conformal scale invariance, the particle masses of cosmic objects should vary with the cosmic length scale. We study cosmological consequences of comoving cosmic masses which co-evolve by mass with the expansion of the universe. The vanishing of the covariant divergence of the cosmic energy-momentum tensor under the new prerequisite that matter density only falls off with the reciproke of the squared cosmic scale S(t) then leads to the astonishing result that cosmic pressuredoes not fall off adiabatically but rather falls off in a quasi-isothermal behaviour, varying with S(t) as matter density does. Hence, as a new cosmological fact, it arises that, even in the late phases of cosmic expansion, pressure cannot be neglected what concerns its gravitational action on the cosmic dynamics. We then show that under these conditions the cosmological equations can, however, only be solved if, in addition to matter, also pressure and energy density of the cosmic vacuum are included in the calculation. An unaccelerated expansion with a Hubble parameter falling off with S(t)⁻¹ is obtained for a vacuum energy density decay according to S(t)⁻² with a well-tuned proportion of matter and vacuum pressures. As it appears from these results, a universe with particle masses increasing with the cosmic sale S(t) is in fact physically conceivable in an energetically consistent manner, if vacuum energy at the expansion of the universe is converted into mass density of real matter with no net energy loss occuring. This universe in addition also happens to be an economical one which has and keeps a vanishing total energy.     

Image Formation in Low Vacuum SEM

The role of positive gaseous ions in the formation of secondary electron images in low vacuum scanning electron microscopes is discussed. This paper describes the charging processes and related effects that occur during high vacuum imaging of insulators and then discusses the influence of ions on those processes. The ions are responsible for a number of phenomena, including distortion of the electric field above and below the specimen surface due to space charge, removal of excess negative charge from the specimen, alteration of the specimen surface barrier, and scavenging/filtering of the secondary electron emission. The resulting electron-specimen-ion interactions can give rise to interesting contrast effects that are unique to this class of instruments.